Cisco UCS 5108 Spec Sheet

Cisco UCS 5108 Blade Server Chassis
BASE CHASSIS STANDARD CAPABILITIES and FEATURES
9
Thermal efficiencies The Chassis Management Controller (CMC) monitors all the temperature
sensors and regulates fan speeds to maintain the airflow at the minimum
needed to cool the system. The open backplane and deep plenum allow air
to be directed across the blades to ensure cooling is directed where it is
needed most.
To o l -f r e e i ns t all a t i on ■ Requires no specialized tools for chassis installation
■ Provides mounting rails for easy installation and servicing
Mixed blade
configurations
The UCS 5108 Server Chassis can accommodate a maximum of 8 half-width
sever blades or 4 full-width server blades or any combinations of the two sizes
that will fit in the chassis.
UCS Manager If a blade server using a v2 CPU (Ivy Bridge) is installed in the 5108 Server
Chassis, the chassis must be controlled with UCS Manager (UCSM) version
2.2.
Table 3 Capabilities and Features (continued)
Capability/Feature Description

Cisco UCS 5108 Specifications

General

Number of Blade Slots	8
I/O Module Bays	2
Supported Blade Servers	Cisco UCS B-Series Blade Servers
Power Supply Options	Up to four hot-swappable power supplies (AC or DC)
Cooling	Redundant hot-swappable fans
Management	Cisco UCS Manager
Blade Slots	8
Fabric Interconnects	Cisco UCS 6100 or 6200 Series
Power Supplies	Up to 4 hot-pluggable power supplies
Form Factor	6RU rack-mountable