Cisco UCS B200 M3 - Page 11

Cisco UCS B200 M3 Blade Server
CONFIGURING the SERVER
11
— The connectivity options are:
• VIC 1240 installed in VIC 1240 slot and no adapter installed in the mezzanine slot
• VIC 1240 installed in VIC 1240 slot and a Port Expander Card for VIC 1240
installed in the mezzanine slot.
■ See NEBS Compliance on page 48 for complete information on network connectivity
support for a B200 M3 configured with 1 CPU or 2 CPUs.
■ For optimal performance, select DIMMs with the highest clock speed for a given processor.
■ System speed is dependent on how many DIMMs are populated per channel. See Table 7 on
page 16 for details.