Cisco UCS B200 M3 User Manual

Cisco UCS B200 M3 Blade Server
CONFIGURING the SERVER
17
— DIMM choice
— DIMM population (how many DIMMs per channel are populated)
— BIOS setting.
For the DIMMs to run in power-savings mode (1.35 V, if the DIMM supports this), change
the BIOS setting to power-savings mode.
■ With 3 RDIMMs populated per channel, memory always runs at 1.5 V regardless if the BIOS
setting is power-savings mode (1.35 V) or performance mode (1.5 V).
■ With 3 LRDIMMs populated per channel, memory can operate at 1.5 V or 1.35 V, depending
on the BIOS setting.
For more information regarding memory, see CPUs and DIMMs on page 37.

Cisco UCS B200 M3 Specifications

General

System bus rate	8 GT/s
Processor family	Intel
Processor socket	LGA 2011 (Socket R)
Intel Xeon series	E5-2600
Motherboard chipset	Intel C600
Compatible processor series	Intel® Xeon®
Number of processors supported	2
ECC	Yes
Memory form factor	240-pin DIMM
Number of DIMM slots	24
Supported memory types	DDR3-SDRAM
Maximum internal memory	768 GB
RAID levels	0, 1
Storage drive sizes supported	2.5 \
Supported storage drive interfaces	Serial Attached SCSI (SAS), Serial ATA III
USB 2.0 ports quantity	0
On-board graphics card model	Matrox G200
Chassis type	-
Product color	Silver
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	5 - 93 %
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	620 mm
Width	203 mm
Height	50 mm
Weight	4360 g