EasyManuals Logo
Home>Cisco>Server>UCS B200 M3

Cisco UCS B200 M3 User Manual

Cisco UCS B200 M3
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Cisco UCS B200 M3 Blade Server
16
CONFIGURING the SERVER
Caveats
System speed is dependent on how many DIMMs are populated per channel. See Table 7 for
details.
For optimum performance, do not mix DIMMs with different frequencies. If you mix DIMM
frequencies, the system defaults to the lower frequency.
Do not mix RDIMMs with LRDIMMs
DIMMs for CPU 1 and CPU 2 (when populated) must always be configured identically.
Memory mirroring reduces the amount of available memory by 50% (quantity of DIMMs must
be even for mirroring).
By default, starting with UCSM 2.0.4, DIMMs run in memory performance mode (1.5v) by
BIOS default, which yields faster memory speeds than when the BIOS is set for the memory
to run in power-savings mode. Memory speed is dependent on factors such as:
CPU choice
Table 7 DIMM Memory Speeds
DIMM
Speed
DPC
1333-MHz Capable CPU 1600-MHz Capable CPU 1866-MHz Capable CPU
LRDIMM
RDIMM
(DR, SR)
LRDIMM
RDIMM
(DR, SR)
LRDIMM
RDIMM
(DR, SR)
Voltages Voltages Voltages Voltages Voltages Voltages
1.3 V 1.5 V 1.3 V 1.5 V 1.3 V 1.5 V 1.3 V 1.5 V 1.3 V 1.5 V 1.3 V 1.5 V
1333
DIMM
1DPC 1333 1333 1333 1333 1333 1333 1333 1333 1333 1333 1333 1333
2DPC 1333 1333 1333 1333 1333 1333 1333 1333 1333 1333 1333 1333
3DPC 1066 1066
NA
1
Notes...
1. NA = not applicable
1066 1066 1066
NA
1
1066 1066 1066
NA
1
1066
1600
DIMM
1DPC 1333 1333 1333 1333
1600
2
2. These DIMMs operate at 1333 MHz instead of 1600 MHz when used with any E5-2600 CPUs. They operate at 1600
MHz when used with E5-2600 v2 CPUs that support 1600- and 1866-MHz speeds.
1600
2
1333 1600
1600
2
1600
2
1333 1600
2DPC 1333 1333 1333 1333
1600
2
1600
2
1333 1600
1600
2
1600
2
1333 1600
3DPC 1066 1066
NA
1
1066 1066 1066
NA
1
1333
3
3. For E5-2600 v2 CPUs, 8-GB 1600-MHz DIMMs at 3 DIMMs per channel currently are set to operate at 1066 MHz
instead of 1333 MHz
1066 1066
NA
1
1333
3
1866
DIMM
4
4. 1866-MHz DIMMs are only offered and supported with E5-2600 v2 CPU-configured servers
1DPC
NA
1
1333
NA
1
1333
NA
1
1600
NA
1
1600
NA
1
1866
NA
1
1866
2DPC
NA
1
1333
NA
1
1333
NA
1
1600
NA
1
1600
NA
1
1866
NA
1
1866
3DPC
NA
1
1066
NA
1
1066
NA
1
1066
NA
1
1333
NA
1
1333
NA
1
1333

Table of Contents

Other manuals for Cisco UCS B200 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS B200 M3 and is the answer not in the manual?

Cisco UCS B200 M3 Specifications

General IconGeneral
System bus rate8 GT/s
Processor familyIntel
Processor socketLGA 2011 (Socket R)
Intel Xeon seriesE5-2600
Motherboard chipsetIntel C600
Compatible processor seriesIntel® Xeon®
Number of processors supported2
ECCYes
Memory form factor240-pin DIMM
Number of DIMM slots24
Supported memory typesDDR3-SDRAM
Maximum internal memory768 GB
RAID levels0, 1
Storage drive sizes supported2.5 \
Supported storage drive interfacesSerial Attached SCSI (SAS), Serial ATA III
USB 2.0 ports quantity0
On-board graphics card modelMatrox G200
Chassis type-
Product colorSilver
Storage temperature (T-T)-40 - 65 °C
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)5 - 93 %
Harmonized System (HS) code84714100
Weight and Dimensions IconWeight and Dimensions
Depth620 mm
Width203 mm
Height50 mm
Weight4360 g

Related product manuals