Cisco VG202 Hardware Installation Guide

CHAPTER
3-1
Cisco VG202 and Cisco VG204 Voice Gateways Hardware Installation Guide
OL-15959-01
3
Installing Cisco VG202 and Cisco VG204 Voice
Gateways
This chapter provides the procedures for installing your Cisco VG202 and Cisco VG204 voice gateways
and consists of the following sections:
• Safety Recommendations, page 3-1
• Site Log, page 3-3
• Keeping Track—Checklist, page 3-3
• Mounting Tools and Equipment, page 3-4
• Unpacking and Inspection, page 3-4
• Wall-Mounting the Chassis, page 3-5
• Desktop-Mounting the Chassis, page 3-7
• Installing the Ground Connection, page 3-7
• Connecting Cables, page 3-9
Tip While you perform this installation, record your progress and site information. See the suggested format
in the “Keeping Track—Checklist” section on page 3-3.
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
Safety Recommendations
The following information is included to alert you to safety recommendations and best practices when
working with this equipment.
Maintaining Safety with Electricity
Follow these guidelines when working on equipment powered by electricity.

Cisco VG202 Specifications

General

Product Type	Voice Gateway
Voice Ports	2 FXS ports
Network Interfaces	1 x 10/100Base-TX
Protocols Supported	SIP
Operating Temperature	32°F to 104°F (0°C to 40°C)
Relative Humidity	10 - 90% (non-condensing)