6-19
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
Chapter 6 Troubleshooting the VG248
Displaying Status and Configuration Settings
Displaying Detailed Port Status
Step 1 From the main screen, choose Display.
Step 2 Choose Port status.
Step 3 Use the arrow keys to select one of the ports and press Enter.
Step 4 Use the information in Table 6-6 to interpret the port status.
Table 6-6 Cisco CallManager Port Status
Type Description
CallManager link Status of the connection to Cisco CallManager
TFTP server Host name or IP address of the TFTP server
Device name Device name of the port as it appears in Cisco CallManager
Directory number Extension number assigned to the analog device connected to this port
Forwarded to Directory number to which calls are being forwarded
Call state Status of the port from a user's viewpoint.
Remote party Directory name and number of caller
Remote address IP address and port of caller
Codec in use Codec being used by Cisco CallManager:
• G.729A
• G.711 mu-law
• G.711 a-law.
MWI Whether the message waiting indicator for this port is on or off
CallManager name DNS name of the Cisco CallManager host
CallManager IP address IP address of Cisco CallManager
To Next Page
Loading...
Need help?
General