IN-1
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-01
INDEX
A
analog phones, support for 1-8
assigning
default router
2-8
DNS server 2-9
domain name 2-9
feature codes 3-4
host name 2-7
IP address 2-7
subnet mask 2-8
syslog server 6-23
TFTP server 3-2
audience, for this document xi
authentication traps, enabling 2-15
auto registration
MAC address conversion
4-2
of VG248 to Cisco CallManager 4-2
B
basic, call control mode 1-5
basic configuration, for SMDI 5-5
Blind transfer, default feature code for 1-7
C
call control modes
accessing features in
1-6
basic 1-5
choosing 3-4
feature 1-5
general tips 1-4
standard 1-5
understanding 1-4
caller ID
enabling
3-11
understanding 1-7
Call Voice Mail, default feature code for 1-6
Call Waiting, default feature code for 1-7
CDP
enabling
2-10
support for 1-12
chained configuration, for SMDI 5-6
Cisco CallManager
adding MWI port
5-14
adding VG248
auto-registration
4-2
manually 4-3
configuring 4-3
To Next Page
Loading...
