IN-5
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-01
Index
read-write community string, setting 2-12
restarting, VG248 2-4
RFC 1213, support for 1-11
RMON, support for 1-12
RTP, support for 1-10
S
Skinny client control protocol, support for 1-10
SMDI
Async 1 port, description
5-12
Async 2 port, description 5-12
choosing a configuration 5-4
configuring
disconnect notification
5-28
first voice mail port number 5-21
keep alive number 5-27
message desk number 5-24
number of SMDI ports 5-21
pilot directory number 5-20
SMDI number length 5-22
configuring on the VG248 5-19
connecting links to VG248 5-12
link status 5-29
port status and statistics 5-29
resolving errors 5-32
suspending port activity 5-31
validating configuration 5-30
SMDI configuration
basic
5-5
chained 5-6
multiplexing 5-8
SNMP
support for
1-11
SNMP settings
community strings
2-12
configuring 2-12
configuring contact name 2-13
configuring location 2-14
configuring trap receiver stations 2-15
configuring trap settings 2-14
enabling authentication traps 2-15
speakerphones, support for 1-9
SpeedDial, default feature code for 1-6
standard, call control mode 1-5
status
of SMDI link
5-29
SMDI ports 5-29
subnet mask
assigning
2-8
supported devices
analog phones
1-8
fax machines 1-9
modems 1-9
PLAR phones 1-9
speakerphones 1-9
supported telephony features 1-3
To Next Page
Loading...
Need help?
General