Cisco VG248 - Gateway User Manual

3-5
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
Chapter 3 Configuring the Telephony Settings on the VG248
Assigning Feature Codes
You can change these feature codes from their default values using these steps:
Step 1 From the main menu, choose Configure.
Step 2 Choose Telephony.
Step 3 Choose Feature codes.
Step 4 Choose the code to configure.
Step 5 Enter the setting for the code.
The default settings for the feature codes are as follows:
Code Default Setting Call Mode
Hang up last call
#1 Feature
Transfer
#2 Feature
Conference
#3 Feature
Forward all to voice mail
**0 All
Call forward all
1
**1 All
Cancel call forward
**2 All
Pickup
**3 All
Redial
*# All
SpeedDial Voicemail
*0 All
SpeedDial 1
*1 All
SpeedDial 2
*2 All
SpeedDial 3
*3 All
SpeedDial 4
*4 All
SpeedDial 5
*5 All
SpeedDial 6
*6 All
SpeedDial 7
*7 All
SpeedDial 8
*8 All
SpeedDial 9
*9 All

Cisco VG248 - Gateway Specifications

General

Brand	Cisco
Model	VG248 - Gateway
Category	Gateway
Language	English