Chapter 4 Configuring Analog Phones Using Cisco CallManager
Configuring the VG248 Analog Ports
4-4
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
For example, if you have 48 devices connected to the VG248, you must add and
configure 48 ports to Cisco CallManager. Cisco CallManager recognizes 48
separate phones connected to it.
After these phones are added to Cisco CallManager, treat them as you would any
other phone in your IP telephony network. You need to add directory numbers,
calling search space, and so on. Refer to the documentation and online help
included with Cisco CallManager for details.
If you are using any ports on the VG248 for SMDI connections, refer to the
“Configuring VG248 SMDI Ports in Cisco CallManager” section on page 5-13for
details.
To Next Page
Loading...
Need help?
General