Connecting the WAP4410N Access Point
Connecting the WAP4410N Access Point to the Network
WAP4410N Wireless-N Access Point with Power Over Internet 13
4
Using a Standard Switch to Connect the WAP4410N Access
Point to the Network
To connect the WAP4410N Access Point to your network using a standard switch,
follow these steps.
STEP 1 Use the supplied Ethernet cable to connect the Ethernet port of the access point
to an Ethernet port on the switch.
STEP 2 Connect the included power adapter to the Power port of the WAP4410N Access
Point.
STEP 3 Plug the power adapter into an electrical outlet.
The LEDs on the front panel light up as soon as the WAP4410N Access Point
powers on.
To Next Page
Loading...
