Setting Up the WAP4410N Wireless-N Access Point
Navigating the Utility
WAP4410N Wireless-N Access Point with Power Over Internet 15
5
system you are using. Use your computer’s local Help and Support functionality
and search for “IP Addressing.”
STEP 3 Launch a web browser, such as Internet Explorer or Mozilla Firefox.
STEP 4 In the Address field enter the default DHCP address and press the Enter key.
STEP 5 In the User Name and Password fields enter the default of admin.
STEP 6 Click Log in.
Navigating the Utility
The web-based utility consists of the following main screens:
• Setup
• Wireless
• Security Monitor
• Administration
• Status
Setup
This screen allows you to configure the host name and IP address settings and to
set the time. This screen consists of the following screens:
• Basic Setup—Configures the host name and IP address settings for this
access point.
• Time—Sets the time on this access point.
• Advanced—Sets the HTTP Redirect and 802.1x supplicant settings for this
access point.
Wireless
This screen allows you to enter a variety of wireless settings for the access point.
To Next Page
Loading...
