Cisco WAP4410N - Small Business Wireless-N Access Point - Configuring VLAN & Qos

Configuring the WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet 44
6
STEP 3 Click Save.
Configuring VLAN & QoS
This Wireless > VLAN & QoS page allows you to configure the Qos and VLAN
settings for the access point.
The Quality of Service (QoS) feature allows you to specify priorities for different
types of traffic.
Lower priority traffic will be slowed down to allow greater throughput or less
delay for high priority traffic. The 802.1Q VLAN feature allows traffic from different
sources to be segmented. Combined with the multiple SSID feature, this provides
a powerful tool to control access to your network.