Configuring the WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet 37
6
Configuring RADIUS Security
This option features a RADIUS server for client authentication.
CAUTION Use this mode only when a RADIUS server is connected to the access point.
To enable wireless Remote Authentication Dial-In User Service (RADIUS) security,
follow these steps:
STEP 1 Click Wireless > Security.
STEP 2 From the Security Mode drop-down menu, select RADIUS.
STEP 3 To enable wireless isolation within the SSID, click Enabled.
To Next Page
Loading...
