Cisco WAP4410N - Small Business Wireless-N Access Point - Page 57

Configuring the WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet 48
6
STEP 3 In the Load Balancing section, configure the following advanced parameters for
this access point:
• Load Balancing—Enable this feature to spread work between two or more
access points to get optimal resource utilization, throughput, or response
time.
• Utilization Threshold—Enter the desired utilization value for the SSID.
• Current Utilization—Display the current value of the utilization.
STEP 4 Click Save.