Cisco WS-C3020 - Page 12

Contents
xii
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
Configuring an Ethernet Interface as a Trunk Port 11-19
Interaction with Other Features 11-20
Configuring a Trunk Port 11-21
Defining the Allowed VLANs on a Trunk 11-22
Changing the Pruning-Eligible List 11-23
Configuring the Native VLAN for Untagged Traffic 11-23
Configuring Trunk Ports for Load Sharing 11-24
Load Sharing Using STP Port Priorities 11-24
Load Sharing Using STP Path Cost 11-26
Configuring VMPS 11-27
Understanding VMPS 11-28
Dynamic-Access Port VLAN Membership 11-28
Default VMPS Client Configuration 11-29
VMPS Configuration Guidelines 11-29
Configuring the VMPS Client 11-30
Entering the IP Address of the VMPS 11-30
Configuring Dynamic-Access Ports on VMPS Clients 11-30
Reconfirming VLAN Memberships 11-31
Changing the Reconfirmation Interval 11-31
Changing the Retry Count 11-32
Monitoring the VMPS 11-32
Troubleshooting Dynamic-Access Port VLAN Membership 11-33
VMPS Configuration Example 11-33
CHAPTER 12 Configuring VTP 12-1
Understanding VTP 12-1
The VTP Domain 12-2
VTP Modes 12-3
VTP Advertisements 12-3
VTP Version 2 12-4
VTP Pruning 12-4
Configuring VTP 12-6
Default VTP Configuration 12-6
VTP Configuration Options 12-7
VTP Configuration in Global Configuration Mode 12-7
VTP Configuration in VLAN Database Configuration Mode 12-7