Cisco WS-C3020 - Page 11

Contents
xi
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
CHAPTER 10 Configuring Smartports Macros 10-1
Understanding Smartports Macros 10-1
Configuring Smartports Macros 10-2
Default Smartports Macro Configuration 10-2
Smartports Macro Configuration Guidelines 10-3
Creating Smartports Macros 10-4
Applying Smartports Macros 10-5
Applying Cisco-Default Smartports Macros 10-6
Displaying Smartports Macros 10-8
CHAPTER 11 Configuring VLANs 11-1
Understanding VLANs 11-1
Supported VLANs 11-2
VLAN Port Membership Modes 11-3
Configuring Normal-Range VLANs 11-4
Token Ring VLANs 11-6
Normal-Range VLAN Configuration Guidelines 11-6
VLAN Configuration Mode Options 11-7
VLAN Configuration in config-vlan Mode 11-7
VLAN Configuration in VLAN Database Configuration Mode 11-7
Saving VLAN Configuration 11-7
Default Ethernet VLAN Configuration 11-8
Creating or Modifying an Ethernet VLAN 11-9
Deleting a VLAN 11-10
Assigning Static-Access Ports to a VLAN 11-11
Configuring Extended-Range VLANs 11-12
Default VLAN Configuration 11-12
Extended-Range VLAN Configuration Guidelines 11-13
Creating an Extended-Range VLAN 11-13
Creating an Extended-Range VLAN with an Internal VLAN ID 11-15
Displaying VLANs 11-16
Configuring VLAN Trunks 11-16
Trunking Overview 11-16
Encapsulation Types 11-18
IEEE 802.1Q Configuration Considerations 11-19
Default Layer 2 Ethernet Interface VLAN Configuration 11-19