Connection to Power
The power switch is located on the front of the printer 1.
recessed below the control panel. Check that the power
switch is turned OFF.
Insert the power cord in to the inlet on the printer.2.
Insert the plug of the power cord in the AC outlet.3.
AC Outlet
Power Cord Inlet
Power Switch
Use an AC outlet that accepts a three-pronged plug. Otherwise, static
electricity may be generated and there will be danger of electric
shock.
Driver Installation
The computer may automatically detect the presence of the new printer
when it is first started, depending on the computer type, interface and
operating system. Follow any on-screen instruction and also instructions
supplied with any additional CD-ROM or floppy disk included with your
printer.
Your supplier will assist you with the correct drivers and software which are
compatible with your particular computer system.
Caution
To Next Page
Loading...
Need help?
General
