Citrix ADC MPX - Page 115

Citrix ADC MPX
1 root@ns# atacontrol rebuild ar0
2 <!--NeedCopy-->
7. Monitor the rebuild process.
1 root@ns# atacontrol status ar0
2 <!--NeedCopy-->
Output:
1 ar0: ATA RAID1 status: REBUILDING 10% completed
2 subdisks:
3 0 ad4 ONLINE
4 1 ad6 SPARE
5 <!--NeedCopy-->
Note: Rebuilding the RAID array takes some time.
8. Verify that the REBUILD is successful.
1 root@ns# atacontrol status ar0
2 <!--NeedCopy-->
Output:
1 ar0: ATA RAID1 status: READY
2 subdisks:
3 0 ad4 ONLINE
4 1 ad6 ONLINE
5 <!--NeedCopy-->
Note: Aer the rebuild operation completes, the subdisks status shows ONLINE, and the RAID
status shows READY.
9. Exit the shell and verify the status of the RAID array from the Citrix ADC CLI.
1 root@ns# exit
2 >sh raid
3 <!--NeedCopy-->
Output:
1 RAID1 status: READY
2 Drive:
3 1 ONLINE
© 1999–2023 Cloud Soware Group, Inc. All rights reserved. 115