ENGINE
117
TOOLS
[1] Camshaft setting pegs : (-).0189.A
[2] Crankshaft setting peg : (-).0189.B
Tool kit C.0189.
[3] Belt locking pin : (-).0189.K
[4] Angular tightening adaptor : 4069-T
[5] Hub immobilising tool : 6310-T
CHECKING THE V
ALVE TIMING..
- Turn the engine by the crankshaft pinion screw (3) to bring it to pegging position.
- Peg the crankshaft, using tool [2].
- Peg the camshaft pulleys, using tools [1].
NOTE : The pegs [1] must go in without effort.
CHECKING AND SETTING THE VALVE TIMING
Engine : 6FZ - RFN
B1BP25PCB1BP22SC
To Next Page
Loading...
