312
BRAKES
XSARA - All Types
REAR BRAKE SPECIFICATIONS
Evolution : Rear brake disc hub 01/99 #
New assemblyOld assembly
Evolutions
New assembly
NOTE : The new assembly is identified by a figure from 1 to 6 cold-stamped on the head of the wheel stub at "c".
Sealing of the brake disc hub.
New components:
- Sealed bearing incorporated at "c" (ref. (6)).
- Spacer without seal face (ref. (5)).
- Cap (ref. (8)).
Fixing of the brake disc hub.
New components:
- Rear wheel stub.
- Double shouldered washer (ref. (7)).
Ref. "c". : Figure from 1 to 6 cold-stamped.
(5) Spacer without seal face.
(6) Sealed bearing incorporated at "b".
(7) Double shouldered washer, exterior diameter = 48 mm.)
(8) Cap.
B3FP11BD B3FP11CD
To Next Page
Loading...
