CITROEN 2001 BERLINGO - Checking and Adjusting the Load-Sensitive Brake Compensator

324
BRAKES
XSARA PICASSO - All Types
CHECKING AND ADJUSTING THE LOAD-SENSITIVE BRAKE COMPENSATOR
Tools [1] Brake pressure checking tool : 4140-T
Checking procedure
Determine the weight on the rear axle and then refer to the adjustment
graphs.
The allocation table enables you to choose which graph to use for each
type of vehicle.
Connect the tool [1] in order to check the rear pressure values relative to
the front pressures (60 and 100 bars).
Rear weight of the vehicle (tank empty + 1 person)
Note the vehicle type.
Consult the correspondence table.
Masse carburant dans le réservoir.
Relever le niveau du carburant du véhicule et en déduire la masse
d’après le tableau.
Determining the rear weight of the vehicle
Refer to the tables of different weights.
To obtain the rear weight of the vehicle, add the following weights :
- Rear weight of the vehicle (tank empty + 1 person).
- Weight of fuel in the fuel tank.
- Weight of the options on the vehicle.
Remove from the vehicle any object that could weigh more than 1 Kg.
Engine type
NFZ
6FZ
RFN
RHY
Rear weight (tank empty + 1 person)
542
531
532
540
Level of fuel
(Litres)
5
1/4
1/2
3/4
Full
Weight of fuel in the fuel tank (Kg)
DieselPetrol
44
12
24
36
48
11
22
33
44