63
ALL TYPESSPECIAL FEATURES - TIGHTENING TORQUES ( m.daN )
Engine type CDZ HDZ-HFX KFX-KFW NFZ NFU-NFX VJZ-VJY-VJX
Maximum permissible bow
0.05
Gasket surface regrinding
- 0.20
ENGINE
CYLINDER HEAD (mm)
TIGHTENING TORQUES ( m.daN)
Crankshaft Pre-tightening
bearing screws Loosening
Tightening
Angular tightening
Tightening
Pre-tightening
Connecting rod Loosening
screws Tightening
Angular tightening
Flywheel screw
Pre-tightening
Tightening
Angular tightening
Crankshaft Tightening
pinion screw Angular tightening
Crankshaft Pre-tightening
pulley screw Tightening
Camshaft Pre-tightening
pulley screw Angular tightening
Camshaft hubs
Camshaft end pulley screw
Camshaft hub Pre-tightening
screw Tightening
2 ± 0.2 2 ± 0.2
45° 50°±5°
3.8 ± 0.4
6.5 ± 0.7
7 ± 0.7
10 ± 1 45°±4°
8 ± 0.8 4 ± 0.4
20°±2°
8 ± 0.8
1 ± 0.1 2.5 ± 0.2
To Next Page
Loading...
