285
AXLES
SUSPENSION
STEERING
H1 = R1 - L1
H1 = From the front suspension arm linkage bolt axis to the ground.
R1 = Radius of the front wheel when laden.
L1 = From the centre of the wheel to the front suspension arm linkage
bolt axis
AXLE GEOMETRY
Measurements at reference height.
Rear heightFront height
H2 = R2 - L2
H2 = From the rear axle flexible mounting face to the ground.
R2 = Radius of the rear wheel when laden..
L2 = From the centre of the wheel to the rear axle flexible mounting
face
B3CP05BC
B3CP058D
B3DP079C
XSARA PICASSO - All Types
To Next Page
Loading...
