286
AXLES
SUSPENSION
STEERING
AXLE GEOMETRY
Compress the suspension to obtain the calculated values.
The difference in height between the two sides should be less than 10 mm.
Measure the radius of the rear wheel: R2.
Calculate dimension H2.
Measure the radius of the front wheel : R1.
Calculate dimension H1.
Measurements at reference height (continued).
(The ref. height of the vehicle is set as per the table below
B3CP05BC B3CP05AC B3DP079C
XSARA PICASSO - All Types
Front axle Rear axle
Front axle
Rear axle
H1 = R1 – 90.5 mm
H2 = R2 + 7 mm
To Next Page
Loading...
