194
INJECTION
FITTING DELPHI DIESEL INJECTORS
B1HPOYEC B1HPOYFC
Engines : VJZ - VJY – VJX - DHY
B1HPOYGC
Fitting an injector
The copper seal (1) and the
fire seal washer (3) are to be
replaced each time they are
removed.
NOTE : Fitting parts of diffe-
rent makes is PROHIBITED.
WARNING :
Ensure that the fire seal
washer (3) is fitted the right
way round.
[1] Tool to remove/refit injectors 7007-T
[2] 7008-T.A Tool kit 4123-T
(3) Tighten lightly to prevent any distortion.
Tighten to 1 m.daN + 20° or 6 m.daN.
Tighten the injector holder
on
the cylinder head to :
VJZ
7 m.daN
All Types
9 m.daN
SAXO - XSARA
To Next Page
Loading...
