230
CLUTCH
GEARBOX
DRIVESHAFTS
BE4/5 GEARBOX - CHECKS AND ADJUSTMENTS
TOOLS.
[1] ] Tool for positioning the gear lever : 9607-T.
ADJUSTMENTS.
WARNING : Cables should be adjusted each
time the gearbox, gear controls or power unit
are removed.
Inside the vehicle.
- Remove the trim under the gear lever.
- Lock the gear lever in neutral position,using tool [1].
Under the bonnet.
- Remove the air filter assembly.
- Unlock the ball-joint keys at "a".
- Place the gear selection and control levers neutral.
- Lock the cable lengths with the ball-joint locking
keys
CHECKS.
- Remove the tool [1].
- Check that all the gears engage without "tightness".
- Check that the gear lever moves identically forwards
and backwards and to right and left. If it does not,
repeat the adjustment.
- Refit the trim under the gear lever.
- Refit the air filter assembly.
Adjusting the gear controls.
Engines : NFZ - 6FZ - RFN - RFS - WJZ - RHY
SAXO - XSARA - XSARA PICASSO
B2CP3C6C
B2CP3C0C
To Next Page
Loading...
