100
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engines: HFX - KFV - NFU - NFS
B1EP18SD
Timing belt overtensioned.
A: Engine: HFX - KFV.
B: Engine: NFU - NFS.
Turn the tensioner roller (7) with the aid of a hexagonal spanner at «a».
Bring the index «c» to position «f», to tension the belt to the maximum of the interval
indicated.
Hold the tensioner roller (7), using tool [4].
Tighten the fixing nut of the tensioner roller, tightening to 1 ± 0,1 m.daN.
Turn the crankshaft by 4 rotations
(normal direction of rotation)
.
IMPERATIVE: Never make the crankshaft rotate backwards.
Make sure that the timing is correctly set by refitting the tools [1], [2] and [3].
Remove the tools [1], [2] and [3].
C2 - C3 - C3 PLURIEL
To Next Page
Loading...
