CITROEN C2 - Axle Geometry: C3

AXLES
SUSPENSION
STEERING
191
C2AXLE GEOMETRY
B3CP07SD
Measuring front height Measuring rear height
[1] Gauge for measuring the wheel radius, 4 bolts, tool 8006-T
Z1 = Measuring zone underneath the front subframe. Z2 = Measuring zone underneath the rear sill.
Measure the radius of the front wheel R1 - Calculate dimension H1 = R1-L1 Measure the radius of the rear wheel R2 - Calculate dimension H2 = R2+L2
Except CRD vehicles (*) Except CRD vehicles (*)
Value at reference
TU1JP/3JP - DV4TD TU5/JP4/JP4S
Value at reference
TU1JP/3JP - DV4TD TU5/JP4/JP4S
height L1 = 142,5 mm L1 = 152,5 mm height L2 = 52 mm L2 = 42 mm
(+ 6 - 8 mm)
CRD vehicles (*)
(+ 10 - 6 mm)
CRD vehicles (*)
TU1JP/3JP - DV4TD TU5/JP4/JP4S TU1JP/3JP - DV4TD TU5/JP4/JP4S
L1 = 132,5 mm L1 = 152,5 mm L2 = 62 mm L2 = 42 mm
Compress the suspension to obtain the calculated values.The height difference between the two axle wheel should be less than 10 mm.
(*) = CRD: Difficult road conditions (for a type of vehicle with axles and suspensions adapted for driving on rough road surfaces).
Angl.-T1-page190-217-2005 9/01/06 9:25 Page 191