CITROEN C2 - Checking the Efficiency of the Air Conditioning System; Filtering and Drying Cartridge

253
AIR CONDITIONING
CHECKING THE EFFICIENCY OF THE AIR CONDITIONING SYSTEM
Setting the checking tool [1] to measurement mode.
Operate the checking tool, press on button "j".
Select the type of aircon fluid: R134.a or R12:
- Press on button "l", validate by pressing on button "k".
Select the type of aircon fluid: with filtering and drying cartridge, or calibrated aperture:
- Press on button "l", validate by pressing on button "k".
Select the temperature setting T3:
- Press on button "l", validate by pressing on button "j".
NOTE: The tool is in measurement mode.
Aircon compressor with fixed capacity:
- Take the measurement with the engine running at idle.
Aircon compressor with variable capacity:
- Take the measurement with the engine running at 1500 rpm.
Setting the checking tool to diagnostic mode.
Set the checking tool to diagnostic mode, press on button "j".
The diagnosis is performed instantaneously: values outside the tolerances are displayed on a dark background.
E5AP2FAC
Angl.-T1-PAGE244-262-2005 9/01/06 9:30 Page 253