OPERATIONS TO BE CARRIED OUT AFTER A REPAIRC2 - C3
8
GENERAL
IMPERATIVE: All these operations are to be performed following a reconnection of the battery.
Antiscanning function.
It is necessary to wait 1 minute after the battery has been disconnected in order to be able to start the vehicle.
T
ailgate.
The opening of the tailgate is deactivated on reconnection of the battery.
Perform locking/unlocking to activate the opening of the tailgate.
Overspeed check.
The vehicle's overspeed values have to be re-initialised.
The button on the wiper stalk
(multifunction display B or C)
or the button on the dashboard
(multifunction display A or clock)
operates the following
functions:
- Activation of the vehicle's overspeed function.
- Programming of the overspeed alert.
Electric windows.
It may be necessary to re-initialise the sequential and anti-pinch functions.
NOTE: If the window is open at the time the battery is reconnected, action the window switch several times to close it, then re-initialise.
Open the window fully.
Action and release the window switch until the window is completely closed.
This operation has to be carried out on each electric window.
To Next Page
Loading...
