186
CLUTCH
GEARBOX
TRANSMISSION
DRAINING / FILLING / TOP-UP: AL4 GEARBOX
Tools.
[1] Filling cylinder : (-).0341
Draining.
IMPERATIVE: The gearbox should be drained when the oil is warm
(at least 60°C)
,
to eliminate the impurities in suspension in the oil.
NOTE: Draining is partial, the converter cannot be completely emptied.
Remove the drain plug (1).
NOTE: Approx. 3 litres of oil should flow out.
Filling.
Refit the drain plug (1)
(equipped with a new seal)
, tighten to 2,4 ± 0,2 m.daN.
Remove the oil filler cap (2).
Use tool [1].
Oil capacity for dry gearbox:
- EW engine: 5,85 litres.
- DW engine: 5,40 litres.
- Oil remaining after draining: 3 litres
(approx.).
- Quantity of oil to be put in: 3 litres
(approx.).
Refit the oil filler cap (2)
(equipped with a new seal)
, tighten to 2,4± 0,2 m.daN.
Initialise the oil wear counter
(follow the diagnostic tool procedure)
.
C3
B2CP3AYD
B2CP31GC