CITROEN C2 - TABLE OF FUSES; DASHBOARD FUSES

104
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: KFU
Tools.
[1] Flywheel setting peg : 4507-T
[2] Engine support crossmember :
[3] Crankshaft setting peg : (-).0194.A
[4] Camshaft peg : 4533-TA.C1
[5] Belt retaining pin : 4533-T.AD
Removing.
Raise and support the vehicle, front wheels hanging.
Disconnect the battery.
Remove:
- The front RH wheel.
- The front RH splash-shield.
- The engine cover.
- The accessories drive belt (see corresponding operation) .
- The crankshaft pulley.
- The oil filter.
Remove the upper timing cover (1).
B1BP2ZJD
C3
Angl.-T1-page 92-134-2005 9/01/06 9:16 Page 104