CITROEN C2 - FUEL CONSUMPTION; (IN LITRES;100 KM (MILES PER GALLON))

120
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: 8HY
B1BP2N0C
Checks (continued).
Refit:
- The engine support (7), tighten to 1,5 ± 0,4 m.daN.
- The engine support (4), tighten to 6,1 ± 0,6 m.daN.
- The engine support (5), tighten to 6 ± 0,6 m.daN.
- The electrical harness (6).
Couple:
- The exhaust line, tighten the collar to 2,5 ± 0,3 m.daN.
- The fuel supply unions (1).
- The air/air heat exchanger inlet/outlet pipes (3).
Connect the connector (2).
Refit:
- The accessories belt
(see corresponding operation) .
- The front RH splash-shield (see corresponding operation) .
- The front RH road wheel, tighten to 9 ± 1 m.daN.
Reconnect the battery.
C3
Angl.-T1-page 92-134-2005 9/01/06 9:16 Page 120