CITROEN C2 - BUTTON CONTROLS; A; B; C

127
ENGINE
CHECKING THE VALVE TIMING
Engine: 9HX
Note: The index «c» of the dynamic tensioner roller should be centred in the interval «d».
Check the correct positioning of the index «c».
If it is not correct, repeat the operation to tension the timing belt
(see corresponding operation) .
Remove tools [2] and [3].
Refitting.
Proceed in reverse order.
Tightening torques.
Method for tightening the screw (8):
- Pre-tightening : 3 ± 0,3 m.daN.
- Angular tightening : 180° ± 5°.
Engine support (7) tighten to : 1,5 ± 0,4 m.daN.
Engine support (4) tighten to : 6,1 ± 0,6 m.daN.
Engine support (5) tighten to : 6 ± 0,6 m.daN.
Exhaust line clip: tighten to : 2,5 ± 0,3 m.daN.
Front RH wheel: tighten to : 9 ± 1 m.daN.
IMPERATIVE: Perform the operations that are necessary following a reconnection of the
battery
(see corresponding operation) .
B1EP1HTC
C3
Angl.-T1-page 92-134-2005 9/01/06 9:16 Page 127