CITROEN C2 - CONTROLS AT THE STEERING WHEEL; 1; 2; 3

129
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: 9HX
Move aside the harness (6).
Remove:
- The engine support (7).
- The screw (8).
- The accessories drive pulley (9).
- The lower timing cover (10).
- The upper timing cover (11).
- The tool [1].
Refit the screw (8).
Rotate the crankshaft to bring the camshaft towards its pegging point.
Peg the camshaft, using tool [2]
(oil the peg) .
WARNING: Do not press or damage the track of the engine speed sensor target (14).
Use tool [3] to peg the crankshaft at «b».
Remove:
- The timing belt protector (13).
- The engine speed sensor (14).
Slacken the screw (12) of the tensioner roller, and keep it slackened using an allen spanner at «c».
Detension the timing belt by pivoting the tensioner roller (clockwise) .
Remove the timing belt, starting with the coolant pump pinion.
C3
B1BP2N2C
B1EP18VD
Angl.-T1-page 92-134-2005 9/01/06 9:16 Page 129