188
CLUTCH
GEARBOX
TRANSMISSION
DRAINING / FILLING / TOP-UP: AL4 GEARBOX
Thread of oil then "drip-drip".
Refit the plug (3). Tighten to 2,4± 0,2 m.daN.
"Drip-drip" or nothing.
Refit the oil level plug (3).
Stop the engine.
Add 0.5 litres extra oil into the gearbox.
Repeat the oil level procedure.
NOTE: The level is correct at the moment the thread of oil becomes drip-drip.
Refit the oil level plug (3)
(equipped with a new seal)
, tighten to 2,4± 0,2 m.daN.
Checking the oil level (continued).
Refit the oil filler plug (3)
(equipped with a new seal)
, tighten to 2,4± 0,2 m.daN.
An excessive level of oil can lead to the following consequences:
- Oil heating up abnormally,
- Oil leaks.
A level that is too low will result in the destruction of the gearbox.
C3
B2CP3AZD
To Next Page
Loading...
