CITROEN C2 - Page 247

241
BRAKES
B3FP15XC
BLEEDING AND FILLING THE BRAKING SYSTEM
Tools.
[1] Generic bleeding apparatus : «LURO» or similar
Bleeding, refilling.
Draining.
Drain the brake fluid reservoir (1) to the maximum
(if necessary, use a clean syringe) .
Disconnect the connector (4).
Uncouple the pipe (2).
Unscrew the shaft (3).
Remove the reservoir (1).
- Empty the brake fluid reservoir (1).
- Clean the brake fluid reservoir (1).
Refit:
- The brake fluid reservoir (1).
- The shaft (3).
- Couple the pipe (2).
- Reconnect the connector (4).
Filling the braking system.
WARNING: Use only those hydraulic fluids that are approved and recommended.
- Fill the brake fluid reservoir (1).
Bleeding the braking system.
WARNING: During the bleeding operation, take care to maintain the level of brake fluid in the
reservoir and to top it up, using only brake fluid that is clean and clear.
C3 - C3 PLURIEL
Angl.-T1-PAGE218-243-2005 9/01/06 9:28 Page 241