CITROEN C2 - Page 57

51
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engine KFU
Crankshaft
Accessories drive pulley 0,8 ± 0,2
Pinion fixing on crankshaft
Pre-tightening 4 ± 0,4
Angular tightening 45 ± 4°
Cylinder block
Sump 0,8 ± 0,2
Accessories belt guide roller 4 ± 0,4
Timing belt tensioner roller 2,1 ± 0,2
Accessories belt tensioner roller 2,5 ± 0,2
Alternator support 2,5 ± 0,3
Crankshaft bearing caps
Tightening 2 ± 0,3
Angular tightening 44° (re-used screws cleaned and greased)
Cylinder head
Coolant outlet housing 0,8 ± 0,2
Camshaft bearing caps 1 ± 0,2
Camshaft bearing cap covers 0,9 ± 0,1
Inlet manifold 0,8 ± 0,2
C3
Angl.-t1-page037-91-2005 9/01/06 9:14 Page 51