CITROEN C2 - Situations where the engine does not shut down

54
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engines 8HX 8HZ
Crankshaft
Bearing cap fixing screw
Pre-tightening 1
Slackening YES
Tightening 3
Angular tightening 140°
Con rod nuts
Pre-tightening 1
Slackening YES
Tightening 1,5 ± 0,1
Angular tightening 100° ± 5°
Accessories drive pulley
Pre-tightening 3 ± 0,4
Angular tightening 180° ± 5°
Cylinder block
Sump 1 ± 0,1
Timing belt guide roller 4,5 ± 0,4 3,7 ± 0,4
Timing belt tensioner roller 3 ± 0,3 2,3 ± 0,3
C3 - C3 PLURIEL
Angl.-t1-page037-91-2005 9/01/06 9:14 Page 54