55
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: ES9A
Setting the valve timing (continued).
Adjusting the timing belt tension.
Preliminary operations.
Pivot the plate (25) of the tensioner roller (24), using a spanner (type FACOM S.161).
Engage the screw (21) on the plate (25).
Tighten the screws (21) and (22), tighten to 2,5 ± 0,1 m.daN.
Act on the tensioner roller (24) so as to tension the belt, using a spanner (type FACOM R 161).
Adjust the belt tension, using tool [7]:
- Measuring equipment SEEM CTI 901.1 : 440 ± 15 SEEM units.
- Measuring equipment SEEM CTG 105.5 : 83 ± 2 SEEM units.
- Measuring equipment SEEM CTG 105.6 : 88 ± 2 SEEM units.
WARNING: Never go beyond the tensioner limit.
NOTE: The check of the belt tension is done on the longest belt section between the crankshaft
pinion and the guide roller.
B1EP15WC
To Next Page
Loading...
