ci5000 Series Printer Operation Guide
Version 1.0 4-11
Pump Motor Error
泵电机故障
Pump motor will not turn 泵电机不转
1. Check the resettable Fuses.检查可恢
复保险丝
2. Check the Pump Cable.检查泵电机排
线
3. Contact your local Service Technician
联系当地技术维修人员
Cooling Fan Error 冷
却风扇故障
Fan could be running or not for this fault 该
故障中风扇可能在转或不转
1. Check the resettable Fuses.检查可恢
复保险丝
2. Check the wire cable for damages if
the fan is turning.如果风扇在转,检查
电缆是否损坏
3. Contact your local Service Technician
联系当地技术维修人员
Phase Error 相位故
障
Printhead unable to see or confirm proper
drop charging/phasing. Possibly dirty
printhead.打印头里无法找到正确充电/相
位的墨滴,可能打印头脏了
1. Check for Ink stream breakup.检查墨
线分裂
2. Shutdown Printhead and clean & dry,
then restart 关闭墨线并清洗打印头 3.
Contact your local Service Technician 联
系当地技术维修人员
Charge Error 充电故
障
Charge Electrode shorted. Possibly dirty
Printhead 充电槽短路。可能打印头脏
1. Check for Ink stream breakup.检查墨
线分裂
2. Shutdown Printhead and clean & dry,
then restart 关闭墨线并清洗打印头
3. Contact your local Service Technician
联系当地技术维修人员
Breakup 墨线没有
分裂
No visible drops 看不到墨点
1. Check the F2 Fuse.检查 F2 保险丝
2. Contact your local Service Technician
联系当地技术维修人员
Gutter Error 回收管
故障
Ink stream not going into the Gutter 墨线没
有进入回收管
eck the alignment of the Jet.
Ensure the ink stream in going into the
gutter.检查墨线位置,确保墨线进入
回收管
2. Contact your local Service Technician
联系当地技术维修人员
Temperature Error
打印头温度故障
Printhead temp too hot or sensor shorted
打印头温度过高或传感器短路
1.Contact your local Service Technician
联系当地技术维修人员