Citronix ci5300 - Page 103

ci5000 Series Printer Operation Guide
Version 1.0 4-12
Electronics
Temperature Error
主板温度故障
the cabinet temperature is too high 机箱内
的温度过高
1. Ensure the fan is operating.确认风扇
是否正常运行
2. Ensure the Air filter is not clogged
(replace or clean if needed). 确认空气
过滤网是否堵死（如果需要，更换或
清洁）
3. Contact your local Service Technician
联系当地技术维修人员
High Voltage Trip 高
压故障
the deflection plates are shorted or dirty 偏
转板短路或脏
1. Ensure the Deflection Plates are clean
and dry.检查偏转板是否清洁干燥
2. Watch for Ink buildup due to lack of
grounding.检查是否有接地不好造成的
积墨
3. Check the Jet alignment.检查墨线位
置 4.
Contact your local Service Technician 联
系当地技术维修人员
Modulation Error 调
制故障
no ink droplets have been detected 没有检
测到墨滴
1. Check for any tripped fuses.检查是否
有烧毁的保险丝
2. Ensure that Printhead components
are clean and dry.检查打印头各部件是
否干净，干燥
3. Contact your local Service Technician
联系当地技术维修人员
High Viscosity Error
墨水粘度过高
Ink thickness is too high 墨水粘稠度太高
1. Ensure all the Fill caps are on tight.检
查各注入口盖子是否盖好
2. Ensure the Make-up Tank has the
appropriate Make-up in it.检查溶剂箱
内是否有足够的溶剂
3. Contact your local Service Technician
联系当地技术维修人员
Low Viscosity Error
粘度过低
Ink thickness is too low 墨水粘度太低
1. Contact your local Service
Technician
联系当地技术维修人员
Viscometer Sensor
Error 粘度传感器故
障
ball movement is not detected in the
viscometer 无法检测到粘度计里的小球移
动
1. Contact your local Service Technician
联系当地技术维修人员
Ink Leaking from
Gutter (poor
vacuum)墨水从回
收管溢出（真空
弱）
ink pooling or dripping from the gutter in
the printhead 墨水在回收管里淤积或溢出
1. Check that the Gutter is not blocked
检查回收管没有被堵住
2. Contact your local Service Technician
联系当地技术维修人员