CKD EVD-1000 Series - Operation While Communication Error Occurred Setting

SM-A20758-A/3 3. USAGE
45 2020-10-06
Operation while communication error occurred setting
◼ How to operation (Key operation)
In the F7 screen, press and hold the [SET] key at least two seconds to switch to the setting mode.
◼ How to operation (IO-Link communication)
<Parameter settings>
• HOLD settings
Index: Write "0: HOLD" to 0x011A.
• CLEAR settings
Index: Write "1: CLEAR" to 0x011A.
* An invalid Process Data Status represents a communication error.
This applies only to the Normal and Preset Modes.
In the Direct Mode, the operation continues even if a communication error occurs.
The setting mode is
canceled and returns to
screen F7.
For CLEAR setting at the time of communication error
At least 2 seconds
SET
For HOLD setting at the time of communication error
At least 2 seconds
SET
SET
*Factory setting
After the data is confirmed, the setting mode is canceled and
returns to screen F7.
After the data is confirmed, the setting mode is canceled and
returns to screen F7.
Index
Sub
Index
Item
Value
0x011A
0
Operation while communication
error occurred setting
0: HOLD
1: CLEAR
Parameter and Command