CKD EVD-1000 Series - Proportional Value Change Setting

SM-A20758-A/3 3. USAGE
42 2020-10-06
Proportional value change setting
◼ How to operation (Key operation)
In the F5 screen, press and hold the [SET] key at least two seconds to switch to the setting mode.
* For "Lower proportional value", operation takes place with the set level displayed on the screen while
selecting a set level. When the set level is determined, press and hold the [SET] key at least two
seconds to confirm the value.
The proportional value change
setting mode is canceled and
returns to screen F5.
If not using the proportional value change function *Factory setting
After the data is confirmed, the setting mode is canceled and
returns to screen F5.
At least 2 seconds
If using the "Increases proportional value"
If using the "Decreases proportional value"
SET
SET
SET
SET
SET
SET
After the data is
confirmed, the setting
mode is canceled and
returns to screen F5.
At least 2 seconds
At least 2 seconds
At least 2 seconds
Select the setting level.
key: Increases the set level.
key: Decreases the set level.
＋
At least 2 seconds
Select the setting level.
key: Increases the set level.
key: Decreases the set level.
＋
After the data is confirmed, the setting mode is canceled and
returns to screen F5.
After the data is
confirmed, the setting
mode is canceled and
returns to screen F5.
After the data is
confirmed, the setting
mode is canceled and
returns to screen F5.