CKD EVD-3000 Series - Switch Output

SM-A20758-A/3 3. USAGE
40 2020-10-06
Switch output
< Mode 1 >
L (- tolerance limit)
Input signal setting
H (+ tolerance limit)
ON
OFF
Output
< Mode 2 >
L (lower limit)
limit)
H (upper limit)
ON
OFF
Output
◼ How to operation (Key operation)
In F4_1 and F4_2 screen, press and hold the [SET] key at least two seconds to switch to the setting
mode.
Perform the same procedure as F4_1.
At least
2 seconds
After the data is confirmed,
the setting mode is
canceled and returns to
screen F4_1.
The setting mode is canceled
and returns to screen F4_1.
When Mode 1 is used for switch output
When Mode 2 is used for switch output
At least
2 seconds
After the data is confirmed, the setting mode is canceled and returns to
screen F4_1.
At least 2 seconds
SET
SET
SET
SET
SET
SET
SET
When switch output is not used *Factory setting
At least 2 seconds
At least 2 seconds
Enter the target value.
key: Shifts the digit.
key: Increases the value.
At least 2 seconds
At least 2 seconds
After the data is confirmed,
the setting mode is
canceled and returns to
screen F4_1.
Enter the target value.
key: Shifts the digit.
key: Increases the value.
Enter the target value.
key: Shifts the digit.
key: Increases the value.
Enter the target value.
key: Shifts the digit.
key: Increases the value.