Installation
14
5.
Installation
5.1.
Generator positioning
5.1.1.
Handling
e
The generator must always remain in a vertical position as it is not designed to
be laid on its side.
Once unpacked, the generator can be moved on its wheels.
5.1.2.
Packaging removal
m
Two people are required for this operation
The generator is delivered packed in a crate. Use the rear wall of the crate as an
unloading ramp
e
If possible, store the packaging to ensure adequate protection when moved in
the future.
5.1.3.
Positioning
When choosing the installation area for the generator, take into account mini-
mum clearances required for use and maintenance: ideally a free space should
be left of at least 50 cm from the front and rear panels. The clearance at the rear
of the generator, as well as for maintenance, is required to ensure efficient cool-
ing of the compressor.
e
The generator is also equipped with four adjustable stationary feet
To Next Page
Loading...
