Nitrogen Generator NiGen HF - NiGen LCMS
3
1.
Introduction
This document is intended for users of nitrogen generator models NiGen HF and
NiGen LCMS, and provides all information regarding installation, use and main-
tenance.
The generator is intended to be used as a source of nitrogen gas for laboratory
applications, including gas chromatography, ICP, LCMS, sample preparation,
etc..
The manual covers the following models:
As regards installation and maintenance, it is assumed that the user is familiar
with pneumatic circuit components, and in particular is aware of the safety as-
pects of compressed air and nitrogen.
The margin of the text contains the following symbols, indicating:
m
compulsory safety standards to be observed
c
electrical hazard
e
recommendations and important information
It is strongly recommended to carefully read all safety warnings (
par. 2.1.
) be-
fore carrying out any operation on the generator.
Serial number Model
422.02.0310 NiGen HF-0
422.02.0440 NiGen HF-1 115 Vac 60Hz
422.02.0450 NiGen HF-1 230 Vac 50Hz
422.02.0460 NiGen HF-1 230 Vac 60Hz
422.02.0710 NiGen LCMS 40-0
422.02.0640 NiGen LCMS 40-1 115 Vac 60Hz
422.02.0650 NiGen LCMS 40-1 230 Vac 50Hz
422.02.0660 NiGen LCMS 40-1 230 Vac 60Hz
422.02.0810 NiGen LCMS 100-0
To Next Page
Loading...
