Clarion CMV1 User Manual

SIRIUS Satellite Radio Operations
16
CMV1
English
Owner’s manual
Recalling a preset station
A total of 18 satellite radio stations can be stored.
6-SR1, 6-SR2 and 6-SR3
This allows you to store your favorite satellite
radio stations in memory for later recall.
1. Press the [SAT] button to select the desired
band.
2. Press the [MENU] button.
3.Turn the [UP/DOWN] knob to select the
desired preset station.
4. Press the [ENTER] button.
Note:
• After the band selecting, you can also turn the
[UP/DOWN] knob to select a desired preset
channel.
Preset memory
1. Press the [SAT] button to select the desired
band.
2. Select the desired channel.
3.Press the [MENU] button.
4. Turn the [UP/DOWN] knob to select a desired
preset channel.
5. Press and hold the [ENTER] button (2 sec.) to
store the current channel into preset memory.
Receiving stations selected by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1. Press and hold the [SAT] button (1 sec.) to
select the category selection mode.
* If press and hold once again, return to the
channel selection mode.
2. Turn the [UP/DOWN] knob to change the
category item.
3.Press the [X] or [V] button to tune a channel
in the current category.
If press and hold the [X] or [V] button, it will
quick tune a channel in the current category.
If turn the [UP/DOWN] knob, it will tune the first
channel in the next or last category.
Notes:
• When the category selection mode is entered, the
category of the last received channel is displayed
first.
• The category selection mode is canceled when no
channel with the selected category can be found.
Scan function
There are two scan modes : the category scan
mode and the preset scan mode.
During scanning channels are displayed in
abbreviated form, the display mode cannot be
switched.
● Preset scan
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
* This function is available in the channel selection
mode.
1. Press the [OPTION] button
2. Turn the [UP/DOWN] knob to select “Preset
Scan”.
3.Press the [ENTER] button.
And start the preset scanning.
● Category scan
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
* This function is available in the category selection
mode.
1. Press the [OPTION] button to select
“Category Scan”.
2. Press the [ENTER] button.
And start the category scanning.
Note:
• Category scanning is not available when no
category is defined for the current channel.
Parental Lock function
This fuction allows you to set a listening limitation
level. This setting is possible only when a
password is entered.
● Setting the Password
* The factory default setting is “0000”.
1. Press the [OPTION] button.
2. Turn the [UP/DOWN] knob to select
“Parental Password”.
3.Press the [ENTER] button.
4. Input the old password.
4-1. Press the [X] or [V] button to move the
cursor.
4-2. Turn the [UP/DOWN] knob to select a
number.
4-3 Press and hold the [ENTER] button.
5. Input a new password.
Repeat step 4-1 to 4-3.
6. Input the new password again.
Repeat step 4-1 to 4-3.
280PE3161BA_EN.book Page 16 Thursday, March 12, 2009 1:12 PM

Clarion CMV1 Specifications

General

Brand	Clarion
Model	CMV1
Category	Marine Equipment
Language	English