Clarion CMV1 User Manual

42
CMV1
English
Owner’s manual
9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD Player
USB Devices
Display Cause Measure
Error 2 A disc is caught inside the
DVD player and is not
ejected.
This is a failure of DVD player’s mechanism.
Consult your store of purchase.
Error 3 A disc cannot be played
due to scratches, etc.
Replace with a non-scratched, non-warped disc.
Error 6 A disc is loaded upside-
down inside the DVD
player
and does not play.
Eject the disc then reload it properly.
Parental Violation Parental level error Set the correct Parental level.
Wrong Region Region code error Eject the disc, and replace correct region code
disc.
DRM WMA files protected by
DRM are played.
Perform the operation such as skipping a file
(Repeat and random playback mode may be
canceled.).
Not Support Files not supported by this
unit are played.
Display Cause Measure
Error 2 The connected USB device
is not supported.
If the USB device is frozen, disconnect it, reset it,
and reconnect it again.
Connect a proper USB device.
Error 3
(USB memory)
An error occurred when
controlling the USB device.
Disconnect the USB device, and reconnect it
again.
Error 3 (iPod) The selected category has
no track data.
Press the [V] button. If the error is not cleared,
disconnect the iPod, and reconnect it again.
The iPod is frozen. Disconnect the iPod, reset it, and reconnect it
again.
Error 5 (iPod) The connected USB device
is not recognized.
Disconnect the USB device, and reconnect it
again. If the USB device is still not recognized, try
replacing with a different USB device.
If the USB device is frozen, disconnect it, reset it,
and reconnect it again.
280PE3161BA_EN.book Page 42 Thursday, March 12, 2009 1:12 PM

Clarion CMV1 Specifications

General

Brand	Clarion
Model	CMV1
Category	Marine Equipment
Language	English